
WATERPROOFING WITH NANOTECHNOLOGY ON WET SURFACES


Being first of its kind in world and is an impregnate where it goes inside with water into structure to seal porosity without necessity to break the surface like tiles etc. Works with Water against Water and do not require dry surface like conventional waterproofing compounds. Works on cement surface be it concrete, brick (cement or mud), mortar (lime or cement), joineries (cement, stone, mud) etc.
-
Tested as per DIN standards
AKWOSHIELD® can be used to augment strength of concrete, fill voids, cracks, also with paint, coat it by itself, as admixture etc. It is used as impregnate. This can be used to stop leaks in both water running bodies like roof tops, balconies, bath rooms, canals and water holding bodies like sumps, reservoirs, dams etc.
AKWOSHIELD® is a Nano technology based composite product which works by using water as carrier. It neither swells nor works on metal or fabricated surface but works on cement surface be it concrete, brick (cement or mud), mortar (lime or cement), joineries (cement, stone, mud) etc. It sets at different time frame (touch dry to prolonged curing) depending on water content on it without affecting the performance. Vertically it vicks into surface and seals porosity.
Originally it is a powder to be mixed with water and further with other medium except when used in epoxy or any other paints, puttie. Though AKWOSHIELD® can be used while pressure grouting or coating or integral waterproofing it is principally an IMPREGNATE which works with water against water. This does not contain bitumen or any other such products nor segmented under pressure grouting
A Nano-technology based waterproofing compound to arrest leaks from most of the surfaces.
WORKS WITH WATER AGAINST WATER
Akwoshield® Usage
and
It's Applications










